Locate the reset button on the base station, next to the ports. You may then use the device in its default state or reconfigure it using AirPort Utility.īefore resetting your base station, it's best to make sure that its firmware is up to date, if possible. The base station won't be visible in the Wi-Fi status menu or AirPort Utility for up to a minute.The base station network name is set to "Apple Network," followed by the last six digits of the base station's MAC address.The base station name is set to "base station," followed by the last six digits of the base station's MAC (Media Access Control) address.The base station password is set to "public.".The base station is set to request an IP address by DHCP.When performing a hard reset or factory-default reset: (This does not erase data stored on the built-in hard drive of a Time Capsule, or on any external hard drive connected to the base station.) Perform this reset if you're selling or giving away your base station. Factory-default reset: Like a hard reset, but removes any saved configurations and profiles.Perform this reset when the base station is unresponsive, or you're troubleshooting network issues that aren't resolved by other means. Hard reset: Resets the base station to an unconfigured state, but retains the last saved configuration and any profiles, allowing you to restore your base station from previous settings.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |